Cisco SG200 Series Administration Manual page 107

VLAN Management
Voice and Media
STEP 1
STEP 2
STEP 3
!
CAUTION
STEP 4
STEP 5
STEP 6
STEP 7
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
To configure Media VLAN applications:
Click VLAN management > Voice and Media > Media VLAN in the navigation
window.
Select Enable for Admin Mode to globally enable this feature on the switch, and
then click Apply.
Select an interface to configure from the Interface list.
Ports that are members of a LAG cannot be enabled for Media VLAN applications
(see Configuring LAGs).
Click Edit.
From the Application list, select the media traffic type to configure:
• Voice
• Voice Signaling
• Guest Voice
• Guest Voice Signaling
• Softphone Voice
• Video Conferencing
• Streaming Video
• Video Signaling
For Application Status, select Enable to enable priority assignment for the
selected application. Uncheck the box to disable this feature.
If you enabled Application Status, enable or disable the following features:
• Untagged—Select Enable if the media device (LLDP-MED Endpoint) will
send untagged packets. The network policy TLV from the switch must also
indicate this expectation, and a media device must acknowledge that it will
use untagged frames. Uncheck the box to disable this feature.
• VLAN and VLAN ID—Select Enable to specify a VLAN, and then choose a
VLAN ID from the list. Uncheck the box to disable this feature.
6
107