Table of Contents
Advertisement
Administration
Time Settings
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
Global Parameters:
•
SNTP Client Version—The highest SNTP protocol version supported by the
switch.
•
Last Update Time—The time of receipt of the most recent SNTP update.
•
Last Unicast Attempt Time—The time of the most recent attempt by the
switch to synchronize with an SNTP unicast server.
•
Client Mode—The configured SNTP client mode (Unicast or Broadcast).
See the
Setting System Time
•
Server Maximum Entries—Maximum number of servers that you can
configure on the switch.
•
Server Current Entries—Number of SNTP servers currently configured on
the system, as listed in the Unicast SNTP Servers Table.
•
Broadcast Count—Number of SNTP broadcast packets that the switch has
received from SNTP servers.
Adding and Modifying SNTP Servers
The Unicast SNTP Servers Table displays the following information for each SNTP
server that you configure:
•
SNTP Server—IP address or hostname of the SNTP server.
•
Authentication Key ID—Encryption key required to communicate with the
SNTP server.
•
Last Attempt Time—The time of the most recent attempt by the switch to
synchronize with an SNTP unicast server.
•
Status—Operating status of the SNTP server. Possible values are:
-
Success—Client could get the time from this server.
-
Request timed-out—Client request timed out.
-
Bad Date Encoded—A bad date format was received from server.
-
Version Not Supported—Server does not support the SNTP version
configured on the switch.
-
Server Unsynchronized—Switch time is not synchronized with the
server.
to configure this mode.
4
45
Advertisement
Table of Contents
