Table of Contents
Advertisement
Viewing Statistics
System Summary
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
•
System Contact—Name of a contact person. Click Edit to display the
System Settings page and enter this value.
•
Hostname—Name of the switch. Click Edit to display the System Settings
page and enter this value. The default hostname is the word switch
followed by the last three octets of the base MAC address. For example, a
switch with a MAC address of 010203040506 has the default hostname
switch040506 (the six furthest right hexadecimal digits).
•
System Uptime—Time that has elapsed since the last reboot.
•
Current Time—Current system time.
•
Base MAC Address—Switch MAC address.
Hardware and Firmware Version Information
The following hardware and software information displays for the switch:
•
Serial Number—Serial number of the switch.
•
PID VID—Part number and version ID.
•
Maximum Available Power (W)—(PoE switches only) Maximum available
power that can be delivered by the PoE ports.
•
Firmware Version—Firmware version number of the active image.
•
Firmware MD5 Checksum—MD5 checksum of the active image.
•
Boot Version—Version of the boot code.
•
Boot MD5 Checksum—MD5 checksum of the boot code.
In additional, the graphic view of the switch enables you to view settings for each
switch port. To view to display the Port Settings page, click the port.
TCP and UDP Services
This table lists the information for each service that uses TCP or UDP:
•
Service Name—The commonly–used name of the service, if available, such
as HTTP.
•
Type—The transport protocol used for this service (TCP or UDP).
•
Port—The Internet Assigned Numbers Authority (IANA) port number for the
service.
•
IP Address—The IP address, if any, of a remote device that is connected to
this service on the switch.
3
18
Advertisement
Table of Contents
