Table of Contents
Advertisement
Quality of Service
Defining Rate Limit Profiles
STEP 3
NOTE
Defining Rate Limit Profiles
STEP 1
STEP 2
STEP 3
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
Click Apply. Your changes are saved to the Running Configuration.
If you click Restore Defaults, the following mappings are applied to all interfaces.
DSCP Value
00-07
08-15
16-23
24-31
32-39
40-47
48-55
56-63
The rate-limiting feature enables you to set a maximum incoming traffic rate for a
port. When the data rate exceeds configured rate, the switch drops all further
traffic from the port. Rate limits are applied per port.
To apply rate limits, you first use this page to create one or more rate limit profiles.
Profiles specify the criteria that determines when the rate limit is exceeded. Then,
you assign rate limit profiles to interfaces (see
Interfaces).
To add an entry to the Rate limit Profile Table:
Click Quality of Service > Rate Limit Profile in the navigation window.
Click Add.
Enter the parameters:
•
Profile ID—Specify any number from 1–64 to identify the profile.
Output Queue
1
1
2
3
3
4
3
3
Applying Rate Limit Profiles to
12
159
Advertisement
Table of Contents
