Ram Memory Log - Cisco SG200 Series Administration Manual

Viewing Statistics
Logs
NOTE
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide

RAM Memory Log

Use the RAM Memory page to view information about specific RAM (cache) log
entries, including the time the log was entered, the log severity, and a description
of the log.
To display this page, click Status and Statistics > View Log > RAM Memory in the
navigation window.
This page might take up to 45 seconds to display when the table contains the
maximum number of entries.
The RAM Memory Log Table contains the following fields:
• Log Index—Numeric ID for the log entry.
• Log Time—Time at which the log was entered in the Log RAM Table.
• Severity—The log severity can be one of the following:
- Emergency (0)—System is unusable.
- Alert (1)—Action must be taken immediately.
- Critical (2)—Critical conditions.
- Error (3)—Error conditions.
- Warning (4)—Warning conditions.
- Notice (5)—Normal but significant conditions.
- Informational (6)—Informational messages.
- Debug (7)—Provides detailed information about an event.
You can use the Log Settings page to select the severity levels that are
recorded in the log.
• Component - The software component or service that produced the log
entry.
• Description—The log description.
You can click Clear Logs to remove all log entries from RAM.
3
28