Table of Contents
Advertisement
VLAN Management
Voice and Media
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
The Port VLAN Membership page shows that the port is a member of the Voice
VLAN.
To configure OUI-based Voice and Media:
Click VLAN Management > Voice and Media > Telephony OUI Based in the
navigation window.
Check VLAN to enable modifying the VLAN ID and Priority fields.
In the VLAN ID field, specify the VLAN to carry voice traffic. This VLAN should
already be configured on the switch (see
In the Priority field, specify the IEEE 802. 1 p Class-of-Service (CoS) priority level for
VoIP traffic.
Click Apply. Your changes are saved to the Running Configuration.
In the Telephony OUI Based Interface Settings Table, select an interface to
configure, and then click Edit.
Select Enable for the Auto VoIP mode. The port is automatically added as a
member of the voice VLAN.
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
Configuring SIP/H323 Based Voice and Media
You can use the SIP/H323 Based Auto VoIP page to configure the switch to
recognize VoIP traffic by its protocol, such as the Session Initiation Protocol (SIP)
and H.323. The traffic is automatically prioritized based on the traffic class for the
VoIP traffic configured on the ports.
To configure SIP/H323 based Voice and Media:
Click VLAN Management > Voice and Media > SIP/H323 Based in the navigation
window.
Use the Interface Type menu to display ports or LAGs in the Protocol Based
Interface Settings Table.
Select the port or LAG interface to configure and click Edit.
Select Enable for the Auto VoIP Mode.
Creating
VLANs).
6
105
Advertisement
Table of Contents
