Table of Contents
Advertisement
Viewing Statistics
Logs
Logs
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
•
Jabbers—Packets received that were more than 1518 octets long and had
an FCS error during the sampling session.
•
Collisions—Collisions received on the interface since the switch was last
refreshed.
•
Frames of 64 Bytes—64-byte frames received on the interface since the
switch was last refreshed.
•
Frames of 65 to 127 Bytes—65-byte to 127-byte frames received on the
interface since the switch was last refreshed.
•
Frames of 128 to 255 Bytes—128-byte to 255-byte frames received on the
interface since the switch was last refreshed.
•
Frames of 256 to 511 Bytes—256-byte to 511-byte frames received on the
interface since the switch was last refreshed.
•
Frames of 512 to 1023 Bytes—512-byte to 1023-byte frames received on
the interface since the switch was last refreshed.
•
Frames of 1024 to 1518 Bytes—1024-byte to 1518-byte frames received
on the interface since the switch was last refreshed.
The switch generates messages to identify the state of the system and to assist in
diagnosing issues that arise during switch operation. Messages might be
generated in response to events, faults, or errors occurring on the platform and to
changes in configuration.
Logs of these messages are stored in RAM and flash memory. Entries in the flash
log—unlike those in RAM—are stored across platform reboots.
To access the log menu items, click Status and Statistics > View Log in the
navigation window. The log menu includes the following pages:
•
RAM Memory Log
•
Flash Memory Log
3
27
Advertisement
Table of Contents
