Table of Contents
Advertisement
Viewing Statistics
System Summary
STEP 1
STEP 2
STEP 3
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
•
Default—Displays Yes to indicate that the web-based switch configuration
utility login page will display in this language whenever the switch is
rebooted.
•
Status—Displays Active or Inactive. At log-in, the user can choose a
language. The selected language is the Active language.
Configuring System Settings
To configure the system settings:
Click Status and Statistics > System Summary. The System Settings page
opens.
Click Edit to modify the following settings:
•
System Location—Enter the location where the switch is physically located.
•
System Contact—Enter the name of a contact person.
•
Hostname—Enter the hostname. Use only letters, digits, and hyphens. Host
names cannot begin or end with a hyphen. No other symbols, punctuation
characters, or blank spaces are permitted (as specified in RFC1033,
RFC1034, and RFC1035). The default hostname is the word switch followed
by the first three bytes of the base MAC address. For example, a switch with
a MAC address of 010203040506 has the default hostname switch010203.
Click Apply. Your changes are saved to the Running Configuration.
3
20
Advertisement
Table of Contents
