Configuring System Default Zoning Settings - Cisco Nexus 6000 Series Configuration Manual

Enhanced Zoning
Step 4

Configuring System Default Zoning Settings

You can configure default settings for default zone policies and full zone distribution for new VSANs on the
switch.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
104
Command or Action
zone commit vsan vsan-id
Example:
switch(config)# zone commit vsan 340
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
system default zone default-zone permit
Example:
switch(config)# system default zone
default-zone permit
no system default zone default-zone permit
Example:
switch(config)# no system default zone
default-zone permit
system default zone distribute full
Example:
switch(config)# system default zone
distribute full
no system default zone distribute full
Example:
switch(config)# no system default zone
distribute full
Configuring and Managing Zones
Purpose
Commits the changes made to the
specified VSAN.
Purpose
Enters global configuration mode.
Configures permit as the default zoning policy
for new VSANs on the switch.
Configures deny (default) as the default zoning
policy for new VSANs on the switch.
Enables full zone database distribution as the
default for new VSANs on the switch.
Disables (default) full zone database
distribution as the default for new VSANs on
the switch. Only the active zone database is
distributed.
OL-27932-01