Table of Contents
Advertisement
Administration
LLDP-MED
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
NOTE
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
To configure these settings on a port:
Click Administration > Discovery - LLDP-MED > LLDP MED Port Settings in the
navigation window.
Each entry in the LLDP MED Port Settings Table displays the LLDP-MED
configuration for a port.
Select a port to configure and click Edit.
Specify the following for the selected port:
•
LLDP MED Status—Select to enabled LLDP-MED operation on the port.
•
Configuration Notification—Select to enable the switch to send
notifications when there are topology changes on the network.
Select the Available TLVs that you want the port to include in LLDP
advertisements:
•
Network Policy—VLAN ID, the 802. 1 p class-of-service value, and the
Differentiated Services Code Point (DSCP) value. This information is used to
implement the Voice VLAN feature (see
•
Location—Hexadecimal GPS location coordinates for the switch.
•
PSE—Indicates whether the port advertises itself as Power Sourcing
Equipment capable of providing power to a connected Power-over Ethernet
device. This option appears only on SG200-08p devices.
•
PD—Indicates whether the port advertises itself as a Powered Device,
capable of receiving Power-over-Ethernet. This option can be selected only
for port g1 of SG200-08 devices.
•
Inventory—Hardware and software version information.
•
System Capabilities—Identifies the basic functionality of the switch such as
bridging.
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
You can click Configure Network Policy to display the Media VLAN page. (You can
also click VLAN Management > Voice and Media > Media VLAN in the navigation
window.) This page enables you to assign LLDP-MED applications to VLANs and
configure priority settings for associated traffic.
Voice and
Media).
4
75
Advertisement
Table of Contents
