Configuring The System Settings - Cisco SF500-24 Administration Manual

6
STEP 1
STEP 2
STEP 3
87
• Unit ID of Master Unit
• Model Description—Device model description.
• Serial Number—Serial number.
• PID VID—Part number and version ID.

Configuring the System Settings

To enter system settings:
Click Administration > System Settings.
View or modify the system settings.
• System Description—Displays a description of the device.
• System Location—Enter the location where the device is physically
located.
• System Contact—Enter the name of a contact person.
• Host Name—Select the host name of this device. This is used in the prompt
of CLI commands:
- Use Default—The default hostname (System Name) of these switches is:
switch123456, where 123456 represents the last three bytes of the
device MAC address in hex format.
- User Defined—Enter the hostname. Use only letters, digits, and hyphens.
Host names cannot begin or end with a hyphen. No other symbols,
punctuation characters, or blank spaces are permitted (as specified in
RFC1033, 1034, 1035).
• Custom Login Screen Settings—To display text on the Login page, enter
the text in the Login Banner text box. Click Preview to view the results.
When you define a login banner from the web-based configuration
NOTE
utility, it also activates the banner for the CLI interfaces (Console, Telnet, and
SSH).
Click Apply to save the values in the Running Configuration file.
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
Administration: General Information
System Information