Vlan Port Isolation Commands - ZyXEL Communications Ethernet Switch Cli Reference Manual

C
HA P T E R

VLAN Port Isolation Commands

Use these commands to configure VLAN port isolation on the Switch. VLAN port isolation
allows each port to communicate only with the CPU management port and the uplink ports,
but not to communicate with each other.
81.1 Command Summary
The following section lists the commands for this feature.
Table 175 vlan1q port-isolation Command Summary
COMMAND
show vlan1q port-isolation
vlan1q port-isolation
no vlan1q port-isolation
interface port-channel <port-
list>
no vlan1q port-isolation
vlan1q port-isolation
Ethernet Switch CLI Reference Guide
DESCRIPTION
Displays port isolation settings.
Enables VLAN port isolation.
Disables VLAN port isolation.
Enters config-interface mode for the specified port(s).
Enables VLAN port isolation on the port(s).
Disables VLAN port isolation on the port(s).
81
M P
E 3
C 13
C 13
C 13
C 13
C 13
307