Syslog Commands - ZyXEL Communications Ethernet Switch Cli Reference Manual

C
HA P T E R
Use these commands to configure the device's system logging settings and to configure the
external syslog servers.
73.1 Command Summary
The following table describes user-input values available in multiple commands for this
feature.
Table 156 syslog User-input Values
COMMAND
type
The following section lists the commands for this feature.
Table 157 syslog Command Summary
COMMAND
syslog
no syslog
Table 158 syslog server Command Summary
COMMAND
syslog server <ip-address> level
<level>
no syslog server <ip-address>
syslog server <ip-address>
inactive
no syslog server <ip-address>
inactive
Table 159 syslog type Command Summary
COMMAND
syslog type <type>
syslog type <type> facility <0-
7>
no syslog type <type>
Ethernet Switch CLI Reference Guide

Syslog Commands

DESCRIPTION
Possible values: system , interface
DESCRIPTION
Enables syslog logging.
Disables syslog logging.
DESCRIPTION
Sets the IP address of the syslog server and the severity
level.
level: 0-7
Deletes the specified syslog server.
Disables syslog logging to the specified syslog server.
Enables syslog logging to the specified syslog server.
DESCRIPTION
Enables syslog logging for the specified log type.
Sets the file location for the specified log type.
Disables syslog logging for the specified log type.
73
, switch , aaa , ip .
M P
C 13
C 13
M P
C 13
C 13
C 13
C 13
M P
C 13
C 13
C 13
281