ZyXEL Communications Ethernet Switch Cli Reference Manual page 321

Table 180 Command Summary: Additional Enable Mode (continued)
COMMAND
traceroute <ip|host-name> [vlan
<vlan-id>] [ttl <1-255>] [wait
<1-60>] [queries <1-10>]
traceroute help
write memory [<index>]
Table 181 Command Summary: Additional Configure Mode
COMMAND
bcp-transparency
default-management <in-
band|out-of-band>
hostname <name>
install help
install slot <slot-list> type
<card-type>
no install slot <slot>
mode zynos
no shutdown slot <slot-list>
shutdown slot <slot-list>
transceiver-ddm timer <1 -
4294967>
85.2 Command Examples
This example checks the cable pairs on port 7.
sysname# cable-diagnostics 7
port 7
cable diagnostics result
pairA: Ok
pairB: Ok
Ethernet Switch CLI Reference Guide
DESCRIPTION
Determines the path a packet takes to the specified Ethernet
device.
vlan <vlan-id>: Specifies the VLAN ID to which the
Ethernet device belongs.
ttl <1-255>: Specifies the Time To Live (TTL) period.
wait <1-60>: Specifies the time period to wait.
queries <1-10>: Specifies how many times the Switch
performs the traceroute function.
Provides more information about the specified command.
Saves current configuration in volatile memory to the
configuration file the Switch is currently using or the specified
configuration file.
DESCRIPTION
Enables Bridge Control Protocol (BCP) transparency on the
Switch.
Sets which traffic flow (in-band or out-of-band) the Switch
sends packets originating from itself (such as SNMP traps) or
packets with unknown source.
Sets the Switch's name for identification purposes.
name: 1-64 printable characters; spaces are allowed if you
put the string in double quotation marks (").
Displays command help information.
Changes what type of card is in the slot without restarting the
system.
Uninstalls the card in the slot.
Changes the CLI mode to the ZyNOS format.
Turns on the power to the slot.
Turns off the power to the slot.
Sets the duration of the digital diagnostic monitoring (DDM)
timer.
This defines how often (in miliseconds) the Switch sends the
digital diagnostic monitoring (DDM) information via the
installed transceiver(s).
Chapter 85 Additional Commands
M P
E 0
E 0
E 13
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
321