C
HA P T E R
Use these commands to configure MRSTP on the Switch.
45.1 MRSTP Overview
The Switch allows you to configure multiple instances of Rapid Spanning Tree Protocol
(RSTP) as defined in the following standard.
• IEEE 802.1w Rapid Spanning Tree Protocol
See
Chapter 68 on page 267
for information on MSTP commands.
45.2 Command Summary
The following section lists the commands for this feature.
Table 110 Command Summary: mrstp
COMMAND
show mrstp <tree-index>
spanning-tree mode <RSTP|MRSTP|MSTP>
mrstp <tree-index>
mrstp <tree-index> priority <0-61440>
mrstp <tree-index> hello-time <1-10>
maximum-age <6-40> forward-delay <4-
30>
mrstp interface <port-list>
Ethernet Switch CLI Reference Guide
MRSTP Commands
for information on RSTP commands and
DESCRIPTION
Displays multiple rapid spanning tree configuration
for the specified tree.
tree-index: this is a number identifying the RSTP
tree configuration.
Note: The number of MRSTP tree
configurations supported differs by
model. Refer to your User's Guide
for details.
Specifies the STP mode you want to implement on
the Switch.
Activates the specified MRSTP configuration.
Sets the bridge priority of the Switch for the specified
MRSTP configuration.
Sets the Hello Time, Maximum Age and Forward
Delay values on the Switch for the specified MRSTP
configuration.
Activates MRSTP on the specified ports.
45
Chapter 46 on page 193
M
P
E
3
C
13
C
13
C
13
C
13
C
13
191