ZyXEL Communications Ethernet Switch Cli Reference Manual page 325

Table 185 show hardware-monitor (continued)
LABEL
Current
Max
Min
Threshold
Status
This example displays multicast VLAN configuration on the
sysname> show multicast vlan
Multicast Vlan Status
Index
-----
1
The following table describes the labels in this screen.
Table 186 show multicast vlan
LABEL
Index
VID
Type
This example shows the current status of Power over Ethernet.
sysname# show poe-status
Total Power (W)
Consuming Power (W)
Allocated Power (W)
Remaining Power (W)
The following table describes the labels in this screen.
Table 187 show poe-status
LABEL
Total Power
Consuming Power
Ethernet Switch CLI Reference Guide
DESCRIPTION
This field displays the current voltage at this power supply.
This field displays the maximum voltage measured at this power supply.
This field displays the minimum voltage measured at this power supply.
This field displays the percentage tolerance within which the Switch still
works.
Normal: The current voltage is within tolerance.
Error: The current voltage is outside tolerance.
VID Type
---- ----------
123 MVR
DESCRIPTION
This field displays an entry number for the multicast VLAN.
This field displays the multicast VLAN ID.
This field displays what type of multicast VLAN this is.
MVR: This VLAN is a Multicast VLAN Registration (MVR).
Static: This VLAN is configured via IGMP snooping VLAN in fixed mode.
Dynamic: This VLAN is learned dynamically in auto mode.
See Chapter 27 on page 115
VLAN and IGMP modes.
: 185.0
DESCRIPTION
This field displays the total power the Switch can provide to PoE-enabled
devices.
This field displays the amount of power the Switch is currently supplying to
the PoE-enabled devices.
Chapter 85 Additional Commands
Switch
for more information about IGMP snooping
: 0.0
: 0.0
: 185.0
.
325