ZyXEL Communications Ethernet Switch Cli Reference Manual page 156

Chapter 33 IPv6 Commands
There are three addresses created in total for VLAN 1. The address
"2001:db8:c18:1:219:cbff:fe00:1/64" is created with the interface ID "219:cbff:fe00:1"
generated using the EUI-64 format. The address "2001:db8:c18:1::12b/64" is created exactly
the same as what you entered in the command.
sysname# config
sysname(config)# interface vlan 1
sysname(config-vlan)# ipv6
sysname(config-vlan)# ipv6 address 2001:db8:c18:1::127/64 eui-64
sysname(config-vlan)# ipv6 address 2001:db8:c18:1::12b/64
sysname(config-vlan)# exit
sysname(config)# exit
sysname# show ipv6
VLAN : 1 (VLAN1)
IPv6 is enabled.
MTU is 1500 bytes.
ICMP error messages limited to 10 every 100 milliseconds.
Stateless Address Autoconfiguration is disabled.
Link-Local address is fe80::219:cbff:fe00:1 [preferred]
Global unicast address(es):
2001:db8:c18:1::12b/64 [preferred]
2001:db8:c18:1:219:cbff:fe00:1/64 [preferred]
Joined group address(es):
ff02::1:ff00:12b
ff02::2
ff01::1
ff02::1
ff02::1:ff6f:9159
ND DAD is enabled, number of DAD attempts: 1
ND NS-interval is 1000 milliseconds
ND reachable time is 30000 milliseconds
ND router advertised managed config flag is disable
ND router advertised other config flag is disable
ND router advertisements are sent every 200 to 600 seconds
ND router advertisements lifetime 1800 seconds
This example shows the Switch owns (L displays in the T field) two manually configured
(permanent) IP addresses, 2001::1234 and fe80::219:cbff:fe00:1. It also displays a neighbor
fe80::2d0:59ff:feb8:103c in VLAN 1 is reachable from the Switch.
sysname# show ipv6 neighbor
Address
--------------------------------------- ----------------- -- - ------------
2001::1234
fe80::219:cbff:fe00:1
fe80::2d0:59ff:feb8:103c
S: reachable(R),stale(S),delay(D),probe(P),invalid(IV),incomplete(I),unknown(?)
T: local(L),dynamic(D),static(S),other(O)
156
MAC S T Interface
00:19:cb:0:0:0:1 R L vlan 1
00:19:cb:0:0:0:1 R L vlan 1
00:d0:59:b8:10:3c R D vlan 1
Ethernet Switch CLI Reference Guide