ZyXEL Communications Ethernet Switch Cli Reference Manual page 208

Chapter 49 OSPF Commands
Table 118 OSPF Command Summary (continued)
COMMAND
redistribute static metric-type <1|2>
metric <0-16777214>
redistribute static
no redistribute static
passive-iface <ip-addr/bits>
no passive-iface <ip-addr/bits>
summary-address <ip-address> <mask>
no summary-address <ip-address> <mask>
show router ospf summary-address
no router ospf
49.3 Command Examples
In this example, the Switch (A) is an Area Border Router (ABR) in an OSPF network.
Figure 7 OSPF Network Example
208
Area 1
A
DESCRIPTION
Sets the Switch to learn static routing
information which will use the specified
metric information.
Sets the switch to redistribute static routing
information.
Route redistribution allows your Switch to
import and translate external routes
learned through other routing protocols
(RIP and Static) into the OSPF network
transparently.
Sets the Switch not to learn static routing
information.
Sets the interface to be passive. A passive
interface does not send or receive OSPF
traffic.
Sets the interface to not be passive.
Sets a summary address which is a
network IP address used to cover more
than one network routing entry in order to
reduce the routing table size.
Removes a summary address.
Displays all summary addresses on the
Switch.
Disables OSPF on the Switch.
Area 0
Backbone
IP: 172.16.1.1
Ethernet Switch CLI Reference Guide
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
C 13