C
HA P T E R
Login Account Commands
Use these commands to configure login accounts on the Switch.
38.1 Password Encryption
See
Section 50.1 on page 211
38.2 Command Summary
The following section lists the commands for this feature.
Table 99 logins Command Summary
COMMAND
show logins
logins username <name> password
<password> privilege <0-14>
logins username <name> password
cipher <password> privilege <0-
14>
no logins username <name>
Ethernet Switch CLI Reference Guide
for information on this feature.
DESCRIPTION
Displays login account information.
Creates account with the specified user name and sets the
password and privilege. The privilege level is applied the next
time the user logs in.
name: 1-32 alphanumeric characters.
password: 1-32 alphanumeric characters.
Creates account with the specified user name and sets the
cipher password and privilege. This is used for password
encryption. The privilege level is applied the next time the
user logs in.
name: 1-32 alphanumeric characters.
password: 32 alphanumeric characters.
Removes the specified account.
38
M
P
E
3
C
14
C
14
C
14
175