ZyXEL Communications Ethernet Switch Cli Reference Manual page 250

Chapter 63 RMON
63.3 Command Summary
The following section lists the commands for this feature.
Table 139 rmon Command Summary
COMMAND
rmon alarm alarmtable <alarm-index> variable
<variable> interval <interval-integer>
sample-type <absolute|delta> startup-alarm
<startup-alarm> rising-threshold <rising-
integer> <event-index> falling-threshold
<falling-integer> <event-index> [owner
<owner>]
rmon event eventtable <event-index> [log]
[trap <community>] [owner <owner>]
[description <description>]
rmon history historycontrol <historycontrol-
index> buckets <1-65535> interval <1-3600>
port-channel <interface-id> [owner <owner>]
rmon statistics etherstats <etherstats-index>
port-channel <interface-id> [owner <owner>]
no rmon alarm alarmtable <alarm-index>
no rmon event eventtable <event-index>
no rmon history historycontrol
<historycontrol-index>
no rmon statistics etherstats <etherstats-
index>
show rmon alarm alarmtable [alarm-index]
show rmon event eventtable [event-index]
show rmon history historycontrol [index
<historycontrol-index>]
show rmon history historycontrol port-channel
<interface-id>
show rmon statistics etherstats [index
<etherstats-index>]
show rmon statistics etherstats port-channel
<interface-id>
250
DESCRIPTION
Sets an alarm that occurs when the
sampled data exceeds the specified
threshold. See Section 63.3.2 on page 251
for more information.
Sets the actions that the Switch takes when
an associated alarm is generated by the
Switch.
log: set this to have the Switch record the
logs for the alarm
trap <community>: set this to have the
Switch send a trap with the specified
community.
description: the description of the
event.
Sets RMON history configuration settings.
buckets <1-65535>: the number of data
samplings the network manager requests
the Switch to store. At the time of writing,
the Switch can only store up to 200 data
samplings although you can configure a
bucket number higher than 200.
interval <1-3600>: the time in
seconds between data samplings.
Sets to collect network traffic on the
specified Ethernet port since the last time
the Switch was reset.
Removes the specified alarm's settings.
Removes the action's settings of the
specified event.
Removes the RMON history configuration
settings for the specified event.
Stops collecting network traffic for the
specified event.
Displays all or the specified alarm settings.
Displays all or the specified event settings.
Displays all historical network traffic
statistics or only the specified entry's.
Displays historical network traffic statistics
for the specified port.
Displays all current network traffic statistics
or only the specified entry's.
Displays current network traffic statistics for
the specified port.
Ethernet Switch CLI Reference Guide
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
E 3
E 3
E 3
E 3
E 3