ZyXEL Communications Ethernet Switch Cli Reference Manual page 136

Chapter 31 IP Commands
Table 78 show ip tcp (continued)
LABEL
Remote socket
State
This example shows the UDP statistics and listener ports. See RFC 1213 for more information.
sysname# show ip udp
( 1)udpInDatagrams
( 3)udpInErrors
&UCB Rcv-Q
80bfdac0
80bfd9ac
80c78888
80c79184
80c3188c
80c31830
80bfdb78
80bfdb1c
80bfda64
80bfda08
The following table describes the labels in this screen.
Table 79 show ip udp
LABEL
udpInDatagrams
udpNoPorts
udpInErrors
udpOutDatagrams
&UCB
Rcv-Q
Local socket
136
DESCRIPTION
This field displays the remote IP address and port number in this TCP
connection.
This field displays the state of this TCP connection.
The only value which may be set by a management station is
deleteTCB(12). Accordingly, it is appropriate for an agent to return a
`badValue' response if a management station attempts to set this object to
any other value.
If a management station sets this object to the value deleteTCB(12), then
this has the effect of deleting the TCB (as defined in RFC 793) of the
corresponding connection on the managed node, resulting in immediate
termination of the connection.
As an implementation-specific option, a RST segment may be sent from the
managed node to the other TCP endpoint (note however that RST
segments are not sent reliably).
10198
0
Local socket
0 0.0.0.0:53
0 0.0.0.0:520
0 0.0.0.0:161
0 0.0.0.0:162
0 0.0.0.0:1027
0 0.0.0.0:1026
0 0.0.0.0:1025
0 0.0.0.0:1024
0 0.0.0.0:69
0 0.0.0.0:263
DESCRIPTION
This field displays the total number of UDP datagrams delivered to UDP
users.
This field displays the total number of received UDP datagrams for which
there was no application at the destination port.
This field displays the number of received UDP datagrams that could not be
delivered for reasons other than the lack of an application at the destination
port.
This field displays the total number of UDP datagrams sent by the Switch.
This field displays the process ID.
This field displays the queue number of pending datagrams in this
connection.
This field displays the local IP address and port number for this UDP
listener. In the case of a UDP listener that is willing to accept datagrams for
any IP interface associated with the node, the value is 0.0.0.0.
( 2)udpNoPorts
( 4)udpOutDatagrams
Ethernet Switch CLI Reference Guide
81558
13