Cut Method; Plot Center - Oce 9300 User Manual

Cut method

This setting can be used to select standard cut or synchro cut.
Use Synchro Cut when you have to define a non-standard paper size in
Note:
your application.
The values selected for leading or trailing edge are taken into account when
using Synchro Cut.
Programming cut method
Press 'Program' to enter the main menu.
1
Select '
2
Press 'next/select' to enter the '
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the desired cut method using the
8
Press 'next/select' to confirm the selected cut method.
9
Press 'Program' to exit the main menu.
10

Plot Center

This setting can be used to enable or disable centering of the plot on the paper.
If the center setting is disabled, the plot will be positioned in the upper
left-hand corner of the page.
If Standard Cut is selected, the plot is printed and the media is cut according to
the standard cut functionality. If Plot Center in ON, the plot is shifted up/down
and left/right to be centered on the selected bounding box.
If you print a plot that exceeds standard length, the machine
Note:
automatically switches to synchro cut to prevent you from losing information.
If Synchro Cut is selected, the bounding box of the plot sets hard clip limits. If
Plot Center is ON, the plot is shifted left/right to be centered on the page.
42 Océ 9300 User Manual
' item using the
MEDIA SETTING
' item using the
PLOT POSITION
' item using the
CUT METHOD
or button.
' menu.
MEDIA SETTING
or
' menu.
PLOT POSITION
or button.
' menu.
CUT METHOD
or button.
button.