Hard Disk Drive Installation; Final Install Process - EverFocus EDSR 900F Instruction Manual

Hide thumbs Also See for EDSR 900F:

Table of Contents

E V E R F O C U S

E L E C T R O N I C S

Hard Disk Drive Installation

The first step in installing the hard drive is to insert the hard drive sleeve into

the machine. The hard disk drive default setting is initially set to master. The second

step is to insert the key provided and turn the tray key to the lock position. If this

process is ignored the hard disk drive will not be detected. Follow the previous steps

for the second hard drive or second empty sleeve.

Please Note: If the Hard Disk Drive is not locked in with the key a system

loading screen will keep flashing and the DVR will not go into record

mode. This is because the Hard Drive is not being recognized.

Once you have completed the basic wiring installation and the hard disk drive

installation you are read to turn on the DVR. Simply plug the power source you

installed earlier. The POWER LED lights will light up if power is normal. The next

step is to set up the menu options for the DVR.

C O R P O R A T I O N

Table of Contents

Edsr1600f