Wiring The Dc Power Input - Planet MGSD-10080F User Manual

10-port gigabit managed metro ethernet switch

Hide thumbs Also See for MGSD-10080F:

Table of Contents

User's Manual of MGSD-10080F

2.1.4 Wiring the DC Power Input

The 6-contact terminal block connector on the front panel of MGSD-10080F is used for two DC redundant powers input. Please

follow the steps below to insert the power wire.

Insert positive / negative DC power wires into the contacts 1 and 2 for DC POWER 1, or 5 and 6 for DC POWER 2.

Figure 2-3: MGSD-10080F Upper Panel