Erps Rpl Neighbour Clear; Erps Rpl Owner Clear; Erps Hold Off Timeout - Planet MGSD-10080F User Manual

ERPS RPL Neighbour Clear

Description:
make this node as non-neighbour for a protection group
<group-id> : protection group id for selecting RPL Block.
Syntax:
Erps rpl neighbour clear <group-id>
Parameters:
<group-id>: protection group id 1 - 64

ERPS RPL Owner Clear

Description:
making a node as Non-RPL Block for a protection group
After clear, this node is nore an rpl owner for the given group
(east|west) : selected east(Port 0) or west(Port 1) as RPL Block
<group-id> : protection group id for selecting RPL Block.
Syntax:
Erps rpl owner clear <group-id>
Parameters:
<group-id>: protection group id 1 - 64

ERPS Hold Off Timeout

Description:
configuring hold off timeout for a protection group
in milliseconds 0-10000 in the increments of 100ms
<hold_timeout>
<group-id> : protection group id for configuring hold-off time.
Syntax:
Erps hold off timeout <hold_timeout> <group-id>
Parameters:
: hold-off timeout
574
User's Manual of MGSD-10080F