Planet MGSD-10080F User Manual page 234

• TCP RST
• TCP PSH
• TCP ACK
• TCP URG

Ethernet Type Parameters
The Ethernet Type parameters can be configured when Frame Type "Ethernet Type" is selected.
Object
•
EtherType Filter
•
Ethernet Type Value
Specify the TCP "Reset the connection" (RST) value for this ACE.

0: TCP frames where the RST field is set must not be able to match
this entry.

1: TCP frames where the RST field is set must be able to match this
entry.

Any: Any value is allowed ("don't-care").
Specify the TCP "Push Function" (PSH) value for this ACE.

0: TCP frames where the PSH field is set must not be able to match
this entry.

1: TCP frames where the PSH field is set must be able to match this
entry.

Any: Any value is allowed ("don't-care").
Specify the TCP "Acknowledgment field significant" (ACK) value for this ACE.

0: TCP frames where the ACK field is set must not be able to match
this entry.

1: TCP frames where the ACK field is set must be able to match this
entry.

Any: Any value is allowed ("don't-care").
Specify the TCP "Urgent Pointer field significant" (URG) value for this ACE.

0: TCP frames where the URG field is set must not be able to match
this entry.

1: TCP frames where the URG field is set must be able to match this
entry.

Any: Any value is allowed ("don't-care").
Description
Specify the Ethernet type filter for this ACE.

Any: No EtherType filter is specified (EtherType filter status is
"don't-care").

Specific: If you want to filter a specific EtherType filter with this ACE,
you can enter a specific EtherType value. A field for entering a
EtherType value appears.
When "Specific" is selected for the EtherType filter, you can enter a specific
EtherType value. The allowed range is 0x600 to 0xFFFF but excluding
0x800(IPv4), 0x806(ARP) and 0x86DD(IPv6). A frame that hits this ACE matches
this EtherType value.
234
User's Manual of MGSD-10080F