Planet MGSD-10080F User Manual page 233
10-port gigabit managed metro ethernet switch
Hide thumbs
Also See for MGSD-10080F:
- Quick installation manual (16 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
•
TCP/UDP Source No.
•
TCP/UDP Source
Range
•
TCP/UDP Destination
Filter
•
TCP/UDP Destination
Number
• TCP/UDP Destination
Range
• TCP FIN
• TCP SYN
Specific: If you want to filter a specific TCP/UDP source filter with this
ACE, you can enter a specific TCP/UDP source value. A field for
entering a TCP/UDP source value appears.
Range: If you want to filter a specific TCP/UDP source range filter with
this ACE, you can enter a specific TCP/UDP source range value. A
field for entering a TCP/UDP source value appears.
When "Specific" is selected for the TCP/UDP source filter, you can enter a
specific TCP/UDP source value. The allowed range is 0 to 65535. A frame that
hits this ACE matches this TCP/UDP source value.
When "Range" is selected for the TCP/UDP source filter, you can enter a specific
TCP/UDP source range value. The allowed range is 0 to 65535. A frame that hits
this ACE matches this TCP/UDP source value.
Specify the TCP/UDP destination filter for this ACE.
Any: No TCP/UDP destination filter is specified (TCP/UDP destination
filter status is "don't-care").
Specific: If you want to filter a specific TCP/UDP destination filter with
this ACE, you can enter a specific TCP/UDP destination value. A field
for entering a TCP/UDP destination value appears.
Range: If you want to filter a specific range TCP/UDP destination filter
with this ACE, you can enter a specific TCP/UDP destination range
value. A field for entering a TCP/UDP destination value appears.
When "Specific" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination value. The allowed range is 0 to 65535. A frame
that hits this ACE matches this TCP/UDP destination value.
When "Range" is selected for the TCP/UDP destination filter, you can enter a
specific TCP/UDP destination range value. The allowed range is 0 to 65535. A
frame that hits this ACE matches this TCP/UDP destination value.
Specify the TCP "No more data from sender" (FIN) value for this ACE.
0: TCP frames where the FIN field is set must not be able to match this
entry.
1: TCP frames where the FIN field is set must be able to match this
entry.
Any: Any value is allowed ("don't-care").
Specify the TCP "Synchronize sequence numbers" (SYN) value for this ACE.
0: TCP frames where the SYN field is set must not be able to match
this entry.
1: TCP frames where the SYN field is set must be able to match this
entry.
Any: Any value is allowed ("don't-care").
233
User's Manual of MGSD-10080F
Advertisement
Table of Contents
