• Port Shaper Rate
•
Port Shaper Unit
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous page.
4.9.4 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification
screen in
Figure 4-9-4
appears.
The page includes the following fields:
Object
• Port
• QoS Class
Controls the rate for the port shaper. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to
1-3300 when the "Unit" is "Mbps".
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps". The
default value is "kbps".
Figure 4-9-4 : QoS Ingress Port Classification Page Screenshot
Description
The port number for which the configuration below applies.
The Configuration All with available values will assign to whole ports.
200
User's Manual of MGSD-10080F