Planet MGSD-10080F User Manual page 310

• Longitude
• Altitude
• Map Datum
Civic Address Location
IETF Geopriv Civic Address based Location Configuration Information (Civic Address LCI).
Object
• Country code
• State
• County
• City
It is possible to specify the direction to either North of the equator or South of the
equator.
Longitude SHOULD be normalized to within 0-180 degrees with a maximum of 4
digits.
It is possible to specify the direction to either East of the prime meridian or West
of the prime meridian.
Altitude SHOULD be normalized to within -32767 to 32767 with a maximum of 4
digits.
It is possible to select between two altitude types (floors or meters).

Meters: Representing meters of Altitude defined by the vertical datum
specified.

Floors: Representing altitude in a form more relevant in buildings which
have different floor-to-floor dimensions. An altitude = 0.0 is meaningful even
outside a building, and represents ground level at the given latitude and
longitude. Inside a building, 0.0 represents the floor level associated with
ground level at the main entrance.
The Map Datum used for the coordinates given in this Option

WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code
4327, Prime Meridian Name: Greenwich.

NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime
Meridian Name: Greenwich; The associated vertical datum is the North
American Vertical Datum of 1988 (NAVD88). This datum pair is to be used
when referencing locations on land, not near tidal water (which would use
Datum = NAD83/MLLW).

NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime
Meridian Name: Greenwich; The associated vertical datum is Mean Lower
Low Water (MLLW). This datum pair is to be used when referencing locations
on water/sea/ocean.
Description
The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE
or US.
National subdivisions (state, canton, region, province, prefecture).
County, parish, gun (Japan), district.
City, township, shi (Japan) - Example: Copenhagen
310
User's Manual of MGSD-10080F