Planet MGSD-10080F User Manual page 209

10-port gigabit managed metro ethernet switch

Hide thumbs Also See for MGSD-10080F:

Table of Contents

The page includes the following fields:

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Maximum numbers of supported DSCP values are 64 and valid DSCP value

ranges from 0 to 63.

Ingress side DSCP can be first translated to new DSCP before using the DSCP

for QoS class and DPL map.

There are two configuration parameters for DSCP Translation –

The Configuration All with available values will assign to whole DSCP values.

DSCP at Ingress side can be translated to any of (0-63) DSCP values.

Click to enable Classification at Ingress side.

There are the following configurable parameters for Egress side –

Remap DP0 Controls the remapping for frames with DP level 0.

Remap DP1 Controls the remapping for frames with DP level 1.

The Configuration All with available values will assign to whole DSCP values.

Select the DSCP value from select menu to which you want to remap. DSCP

value ranges form 0 to 63.

The Configuration All with available values will assign to whole DSCP values.

Select the DSCP value from select menu to which you want to remap. DSCP

value ranges form 0 to 63.

User's Manual of MGSD-10080F