Maintainence Entity End Point Command; Mep Config - Planet MGSD-10080F User Manual

6.17 Maintainence Entity End Point Command

MEP Config

Description:
MEP instance configuration
'mep|mip' this entity is either a MEP or a MIP - end point or intermediate point
'ingress|egress' this entity is either a Ingress (down) or Egress (up) type of MEP/MIP
'domport|domevc' the domain is either Port or EVC
'level' is the MEG level
'port' is the residence port
'flow' is the related flow instance number - Port number in Port domain - EVC number in EVC domain
'vid' is used for TAGGED OAM in port domain
'itu|ieee' is the MEG ID format
'meg' is the MEG ID - max. 8 char in case of 'ieee' - 6 or 7 char in case of 'itu'
'mep' is the MEP ID.
Syntax:
MEP config [<inst>] [mep|mip] [ingress|egress] [<port>] [domport|domevc] [<level>] [itu|ieee] [<meg>] [<mep>] [<vid>]
[<flow>] [enable|disable]
Parameters:
<inst> : Instance number
mep|mip : Mode of the MEP instance
ingress|egress: Direction of the MEP instance
<port> : Port number.
domport|domevc: Flow domain
<level> : MEP level (0-7)
itu|ieee : MEG format
ITU: ICC format as defined in Y.1731 ANNEX A
IEEE: String format Domain Name and Short Name as defined in 802.1ag
<meg> : MEG ID (max. 8 chars)
<mep> : This MEP id (0-0x1FFF)
<vid> : C-TAG only applicable for Port MEP
<flow> : Flow instance number (Port/EVC)
enable|disable: enable/disable
519
User's Manual of MGSD-10080F