Factory Default - Planet MGSD-10080F User Manual

After the system reboot, you can use the Alternate Image of Managed Switch.

4.2.25 Factory Default

You can reset the configuration of the stack switch on this page. Only the IP configuration is retained. The new configuration is
available immediately, which means that no restart is necessary. The Factory Default screen in
Buttons
: Click to reset the configuration to Factory Defaults.
: Click to return to the web main page without resetting the configuration.
Figure 4-2-34: Image Select Page Screenshot
Figure 4-2-35: Factory Default Page Screenshot
Figure 4-2-36: Factory Default Page Screenshot
94
User's Manual of MGSD-10080F
Figure 4-2-35 appears.