Mep Delay Measurement Configuration - Planet MGSD-10080F User Manual

MEP Loop Back configuration
'set|clear' is set or clear of DEI of transmitted LBM frame
'prio' is the priority (PCP) of transmitted LBM frame
'uni|multi' is selecting uni-cast or multi-cast transmission of LBM frame
'mac_addr' is the unicast MAC of target MEP/MIP
'mep' is the peer MEP-ID of target MEP - only used if 'mac_addr is 'all zero'
'tosend' is the number of LBM to send
'size' is the size of the LBM data field
'gap' is the gap between LBM.
Syntax:
MEP lb config [<inst>] [set|clear] [<prio>] [uni|multi] [<mac_addr>] [<mep>] [<tosend>] [<size>] [<gap>] [enable|disable]
Parameters:
<inst> : Instance number
set|clear : OAM DEI set/clear
<prio> : OAM PDU priority
uni|multi : Destination address is unicast or multicast
<mac_addr> : MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit)
<mep> : This MEP id (0-0x1FFF)
<tosend> : Number of LBM to send
<size> : Size of LBM data field in bytes (max 1400)
<gap> : Gap between LBM to send in 10ms. (max 100 - '0' is as fast as possible)
enable|disable: enable/disable

MEP Delay Measurement Configuration

Description:
MEP Delay Measurement configuration
'prio' is the priority (PCP) of transmitted DM frame
'uni|multi' is selecting uni-cast or multi-cast transmission of DM frame
'mep' is the peer MEP-ID of target MEP - only used if 'uni'
'oneway|twoway' is selecting one-way (1DM) or two-way (DMM) DM
'std|prop' is selecting standadized or proprietary DM. the latest is using off-standard follow-up message carrying the exact
HW transmit timestamp
'rdtrp|flow' is selecting round-trip or flow delay calculation. Round-trip is not using the far-end timestamps to calculate the
far-end residence time
'gap' Gap between transmitting 1DM/DMM PDU - in 10 ms.
'count' number of frames used for average calculation on the latest 'count' frames received
524
User's Manual of MGSD-10080F