Mep Link Trace Configuration; Mep Loop Back Configuration - Planet MGSD-10080F User Manual

MEP LCK configuration
'prio' is the priority (PCP) of transmitted AIS frame
'1s|1m' is the number of AIS frame pr. second.
Syntax:
MEP lck config [<inst>] [<prio>] [1s|1m] [enable|disable]
Parameters:
<inst> : Instance number
<prio> : OAM PDU priority
1s|1m : Transmit period for LCK
1s - to send OAM Frames in the rate of 1 per second
1m - to send OAM frames in the rate of 1 per minute
enable|disable: enable/disable

MEP Link Trace Configuration

Description:
MEP Link Trace configuration
'prio' is the priority (PCP) of transmitted LTM frame
'mac_addr' is the unicast MAC of target MEP/MIP
'mep' is the peer MEP-ID of target MEP - only used if 'mac_addr is 'all zero'
'tll' is the TLL in the transmitted LTM.
Syntax:
MEP lt config [<inst>] [<prio>] [<mac_addr>] [<mep>] [<ttl>] [enable|disable]
Parameters:
<inst> : Instance number
<prio> : OAM PDU priority
<mac_addr> : MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit)
<mep> : This MEP id (0-0x1FFF)
<ttl> : LT - Time To Live
enable|disable: enable/disable

MEP Loop Back Configuration

Description:
523
User's Manual of MGSD-10080F