Msti Ports Configuration - Planet MGSD-10080F User Manual

10-port gigabit managed metro ethernet switch
Hide thumbs Also See for MGSD-10080F:
Table of Contents

Advertisement

The page includes the following fields:
Configuration Identification
Object
• Configuration Name
• Configuration Revision
MSTI Mapping
Object
• MSTI
• VLANs Mapped
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.7.7 MSTI Ports Configuration

This page allows the user to inspect the current STP MSTI port configurations, and possibly change them as well.
A MSTI port is a virtual port, which is instantiated separately for each active CIST (physical) port for each MSTI instance
configured and applicable for the port. The MSTI instance must be selected before displaying actual MSTI port configuration
options.
This page contains MSTI port settings for physical and aggregated ports. The aggregation settings are stack global. The MSTI
Port Configuration screen in
Description
The name identifiying the VLAN to MSTI mapping. Bridges must share the name
and revision (see below), as well as the VLAN-to-MSTI mapping configuration in
order to share spanning trees for MSTI's. (Intra-region). The name is at most 32
characters.
The revision of the MSTI configuration named above. This must be an integer
between 0 and 65535.
Description
The bridge instance. The CIST is not available for explicit mapping, as it will
receive the VLANs not explicitly mapped.
The list of VLAN's mapped to the MSTI. The VLANs must be separated with
comma and/or space. A VLAN can only be mapped to one MSTI. A unused MSTI
should just be left empty. (I.e. not having any VLANs mapped to it.)
Figure 4-7-9
&
Figure 4-7-10
Figure 4-7-9: MSTI Port Configuration Page Screenshot
appears.
167
User's Manual of MGSD-10080F

Advertisement

Table of Contents
loading

Table of Contents