Qos Port Dscp Classification - Planet MGSD-10080F User Manual

<port_list>: Port list or 'all', default: All ports
enable : Enable DSCP ingress translation
disable : Disable DSCP ingress translation
(default: Show DSCP ingress translation mode)
Default Setting:
disable
Example:
Enable DSCP ingress translation on all port.
MGSD-10080F:/>qos Port DSCP Translation 1-10 enable

QoS Port DSCP Classification

Description:
Set or show DSCP classification based on QoS class and DP level.
This enables per port to map new DSCP value based on QoS class and DP level.
Syntax:
QoS Port DSCP Classification [<port_list>] [none|zero|selected|all]
Parameters:
<port_list>: Port list or 'all', default: All ports
none : No DSCP ingress classification
zero : Classify DSCP if DSCP = 0
selected : Classify DSCP for which class. mode is 'enable'
all : Classify all DSCP
(default: Show port DSCP ingress classification mode)
Default Setting:
none
Example:
Set DSCP classification based on QoS class and DP level in zero
MGSD-10080F:/> QoS Port DSCP Classification 1-10 zero
541
User's Manual of MGSD-10080F