Planet MGSD-10080F User Manual page 56

If there are two LAN cards or above in the same administrator PC, choose different LAN card by
usinh the "Select Adapter" tool.
3. Press "Refresh" button for the currently connected devices in the discovery list as the screen shows
below:
1. This utility shows all necessary information from the devices, such as MAC Address, Device Name, firmware version, and
Device IP Subnet address. It can also assign new password, IP Subnet address and description for the devices.
2. After setup is completed, press "Update Device", "Update Multi" or "Update All" button to take effect. The meaning of
the 3 buttons above are shown as below:

Update Device: use current setting on one single device.

Update Multi: use current setting on choose multi-devices.

Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be finding in "Option" tools bar.
3. To click the "Control Packet Force Broadcast" function, it can allow assign new setting value to the Web Smart Switch
under a different IP subnet address.
4. Press "Connect to Device" button and the Web login screen appears in
5. Press "Exit" button to shutdown the planet Smart Discovery Utility.
Figure 3-7: Planet Smart Discovery Utility Screen
User's Manual of MGSD-10080F
Figure 3-4.
56