Planet MGSD-10080F User Manual page 206

The page includes the following fields:
Object
• Port
• Ingress
• Translate
• Classify
•
Egress
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-9-9 : QoS Port DSCP Configuration Page Screenshot
Description
The Port coulmn shows the list of ports for which you can configure dscp ingress
and egress settings.
In Ingress settings you can change ingress translation and classification settings
for individual ports.
There are two configuration parameters available in Ingress:

Translate

Classify
To Enable the Ingress Translation click the checkbox.
of Managed Switch.
The Configuration All with available options will assign to whole ports.
Classification for a port has 4 different values. All means all ports will have one
specific setting.

Disable: No Ingress DSCP Classification.

DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.

Selected: Classify only selected DSCP for which classification is enabled
as specified in DSCP Translation window for the specific DSCP.

All: Classify all DSCP.
The Configuration All with available options will assign to whole ports.
Port Egress Rewriting can be one of –. All means all ports will have one specific
setting.

Disable: No Egress rewrite.

Enable: Rewrite enabled without remapping.

Remap DP Unaware: DSCP from analyzer is remapped and frame is
remarked with remapped DSCP value. The remapped DSCP value is
always taken from the 'DSCP Translation->Egress Remap DP0' table.

Remap DP Aware: DSCP from analyzer is remapped and frame is
remarked with remapped DSCP value. Depending on the DP level of the
frame, the remapped DSCP value is either taken from the 'DSCP
Translation->Egress Remap DP0' table or from the 'DSCP
Translation->Egress Remap DP1' table.
206
User's Manual of MGSD-10080F
*
means to select all ports