Acl Ports Configuration - Planet MGSD-10080F User Manual

10-port gigabit managed metro ethernet switch

Hide thumbs Also See for MGSD-10080F:

Table of Contents

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

: Return to the previous page.

4.10.4 ACL Ports Configuration

Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the

frame matches a specific ACE.

The ACL Ports Configuration screen in

The page includes the following fields:

Rate Limiter ID

Figure 4-10-4

Figure 4-10-4: ACL Ports Configuration Page Screenshot

The logical port for the settings contained in the same row.

Select the policy to apply to this port. The allowed values are 1 through 8. The

default value is 1.

Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default

value is "Permit". All means all ports will have one specific setting.

Select which rate limiter to apply to this port. The allowed values are Disabled

or the values 1 through 15. The default value is "Disabled". All means all ports

will have one specific setting.

User's Manual of MGSD-10080F