Table of Contents
Advertisement
N E T L I N X M A S T E R C A R D ,
C A R D F R A M E A N D M O D U L E S
The NXF-MINI NetLinx Mini-CardFrame extends the control capabilities of the
AMX NetLinx Control System to a remote area or location. Compatible with the
ME260 Master Card, NI-2000, NI-3000 and NI-4000 NetLinx Controllers, the
Mini-CardFrame allows the installer to add as many as four NetLinx device-
specific control cards for expanding control and automation features.
Available NetLinx Control Cards include:
4 – Port IR/Serial
•
2 – Port RS-232/422/485
•
10 – Channel Relay
•
10 – Channel Input/Output
•
4 – Channel Voltage Output/Analog Input
•
4 – Channel Volume
•
FEATURES
25 mA @ 12 VDC
•
FRONT PANEL
1–4: Shows LED status indicators from optional NXC control cards
•
REAR PANEL
Slots 1–4: 20-pin control card connectors
•
Device: 8-position DIP switch sets the starting address for the Control Cards in
•
the Mini-CardFrame
ICSNet: One RJ45 connector for ICSNet interface
•
PWR: 2-pin jack for +12 VDC power input
•
ENCLOSURE:
Metal with black matte finish
•
MOUNTING OPTIONS:
Rack, wall, or shelf mount
•
DIMENSIONS (HWD):
1.75"x17.0"x9.56" (4.45 cm x 43.18 cm x 24.28 cm)
•
(width does not include mounting ears)
WEIGHT:
6.2 lbs (2.8 kg)
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
NXF-MINI
NetLinx Mini-CardFrame
(CardFrame Only)
FG2104
For more information about AMX products and services visit www.amx.com
11-03
Hide quick links:
Advertisement
Table of Contents
