AMX PTM-D15 Product Catalog page 12

M O D E R O T O U C H P A N E L A C C E S S O R I E S
NXT-CHG
Quick Charger Kit for Modero
Touch Panels
FG2250K
For added convenience, the NXT-BP Power Pack
batteries can be quick-charged with the new
NXT-CHG Modero Power Station. The Power
Station is a two-slot, stand-alone unit that recharges up to two "smart"
batteries, using sequential charging and recalibration techniques. Through
sequential charging, the batteries placed in each slot are recharged one at a
time. Through recalibration, each battery can be completely discharged and
immediately recharged. This unique feature extends the life of each battery.
Recalibration also improves the accuracy of the battery charge reading located
on each battery, as well as feedback listed on the Modero Touch Panels on-
screen Battery Base page. Instantly track the life of each battery in order to
determine the amount of time available for Touch Panel operation.
FEATURES
Comes complete with two NXT-BP batteries
•
Recharges a set of NXT-BP batteries in approximately 4 hours
•
CONNECTORS
Power In: Power from Power Station's Power Supply barrel connector.
•
Battery Interface: 2 (5-pin) connectors one in each charging slot
•
NXA-CFTP128M
128MB Compact Flash Upgrade
FG2116-22
NXA-CFTP256M
256MB Compact Flash Upgrade
FG2116-23
NXA-CFTP512M
512MB Compact Flash Upgrade
FG2116-24
NXA-CFTP1G
1G Compact Flash Upgrade
FG2116-25
NXA-EM128M
128MB SDRAM Upgrade
FG079-01
NXA-EM256M
256MB SDRAM Upgrade
FG079-02
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
The Conduit Wall Box is an optional accessory for the Modero Flush Mount
Modero Touch Panels. The Conduit Box allows the Modero to be mounted
directly to the studs/pre-wall and includes a wall box and mounting screws.
17" PRODUCT DIMENSIONS
13.55" x 17.07" x 3.49" (34.43 cm x 43.36 cm x 8.85 cm)
•
15" PRODUCT DIMENSIONS
13.48" x 14.18" x 3.49" (34.24 cm x 36.00 cm x 8.85 cm)
•
NXA-RK17
Rack Mount Kit for NXD-CV17 &
NXD-CA17
FG2904-52
NXA-RK15
Rack Mount Kit for NXD-CV15 &
NXD-CA15
FG2904-51
NXA-RK12
Rack Mount Kit for NXD-CV12 &
NXD-CA12
FG2904-50
The Rack Mount Kit is an optional accessory for Flush Mount Modero Touch
Panels. The kit allows the Modero to be mounted directly on an equipment rack
and includes a rack mount frame, screws and washers.
MB-TP17
VESA Mounting Kit for NXD-CV17
FG033-50
MB-TP15
VESA Mounting Kit for NXD-CV15
FG032-50
MB-TP12
VESA Mounting Kit for NXD-CV12
FG031-50
Kits enables installation of the wall mount version of the 17" (NXD-CV17), 15"
(NXD-CV15) and 12" ( NXD-CA12) Modero Touch Panels on any VESA(TM)-
compliant mount to include pivots, arms, poles, under-cabinet mounts, etc. The
kit includes a metal back box with VESA 75 x 75 mm mounting pattern, plastic
back cover, and screws. Kit does not include support arm.
CB-TP17
Conduit Box for NXD-CV17
FG034-10
CB-TP15
Conduit Box for NXD-CV15
& NXD-CA15
FG032-10
For more information about AMX products and services visit www.amx.com
11-03