5 . 5 " C O L O R P A S S I V E T O U C H P A N E L S
The 5.5" Color Flush Mount Touch Panel contains a mini 256 color
passive-matrix LCD. The self-contained enclosure uses a microprocessor to
control a wide range of multi-media equipment. Using the TPDesign3 software,
you can create custom control and display pages with buttons, icons, sliders,
bargraphs, time displays, logos and drawings.
• Mounts in a wall, lectern, or any flat surface
• Available with white or black faceplates
• Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)
LCD
5.5" color passive-matrix LCD with a resolution of 320x240 pixels
•
Visible area: 5 inches (12.70 cm)
•
Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)
•
POWER
485 mA @ 12 VDC
•
MEMORY
512KB of SRAM and 2MB of flash for a total of 2.5MB
•
(2MB available for buttons, icons, bitmaps, and fonts)
DIMENSIONS
Decor faceplate: 5.00" x 8.38" x 0.35" (12.70 cm x 21.27 cm x 0.89 cm)
•
Low-profile Back Box: 4.25" x 7.10" x 2.17" (10.80 cm x 18.03 cm x 5.51 cm)
•
BB-MTP: 4.17" x 6.98" x 2.17" (10.59 cm x 17.73 cm x 5.51 cm)
•
ENCLOSURES
Metal sub-plate and bezel with black or white matte finish
•
Detachable front panel faceplate
•
REAR CONNECTORS
AXLink: 4-pin male connector for transfer of data and power to
•
the AMX Central Controller
PUSHBUTTONS
12 programmable pushbuttons (6 on each side)
•
COMPATIBILITY
Axcess and Landmark Control Systems (AXLink is the most common
•
control standard)
OPTIONAL ACCESSORIES
PSN2.8 Power supply (can be used on the MCP)
•
PSN6.5 Power supply (recommended for use on the MCP)
•
4-pin mini-XLR
•
Cable assembly
•
External pushbuttons (6 per side)
•
CB-MTP and faceplate bezel security plates
•
WEIGHT
3.90 lbs (1.70 kg)
•
For more information about AMX products and services visit www.amx.com
11-03
AXD-MCP/PB
5.5" Color Flush Mount Touch Panel
with External Pushbuttons
FG925-41
White
FG925-61
Black
FG925-81
Ivory
• Mounts in a wall, lectern or any flat surface
• Available with a black faceplate
• Available with pushbuttons (MCP/PB) or without pushbuttons (MCP)
LCD
5.5" color passive-matrix LCD with a resolution of 320x240 pixels
•
Visible area: 5 inches (12.70 cm)
•
Screen dimensions (HW): 3.05" x 4.06" (7.75 cm x 10.31 cm)
•
POWER
485 mA @ 12 VDC
•
MEMORY
512KB of SRAM and 2MB of flash for a total of 2.5MB
•
(2MB available for buttons, icons, bitmaps, and fonts)
DIMENSIONS
Rack-mount: 5.22" x 19.0" x 2.37" (13.26 cm x 48.26 cm x 6.02 cm)
•
ENCLOSURES
19" (48.3 cm) rack-mount; metal black matte finish
•
(3 rack units high)
REAR CONNECTORS
AXLink: 4-pin male connector for transfer of data and power
•
to the AMX Central Controller
COMPATIBILITY
Axcess and Landmark Control Systems (AXLink is the most common
•
control standard)
INCLUDED ACCESSORIES
Low-profile Back Box
•
4-pin female AXLink bus connector
•
OPTIONAL ACCESSORIES
PSN2.8 Power supply (can be used on the MCP)
•
PSN6.5 Power supply (recommended for use on the MCP)
•
External pushbuttons (6 per side)
•
WEIGHT
3.60 lbs (1.60 kg)
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
AXM-MCP
5.5" Rack-Mount
Color Passive Touch Panel
FG925-90
Black