AMX PTM-D15 Product Catalog page 65

I N P U T S E N S O R S
CONTROL PORTS
Two open collector transistor outputs (On and Standby)
•
INCLUDES
LED indicators for Standby and On status
•
Sensing for 30 mA-15 A power current levels
•
3-prong, grounded 120 VAC receptacle
•
ENCLOSURE:
Plastic with black matte finish
DIMENSIONS (HWD):
3.1" x 2.2" x 2.5" (80 mm x 57 mm x 64 mm)
WEIGHT:
4 oz (114 g)
OPTIONS
12 VDC power supply
•
CONTROL PORTS
Four relay outputs (On and Standby for each source),1 A @ 28 VDC
•
INCLUDES
On and Standby status LEDs for each source
•
Power LED
•
Sensing for 20 mA, 10 A power current levels
•
Two US-style 3-prong 120 VAC receptacles
•
POWER
1200 W (10A) input power, fuse protected
•
US-style 3-prong 120 VAC power cord
•
ENCLOSURE:
Metal with black matte finish
DIMENSIONS (HWD):
1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT:
28.8 oz (806 g)
OPTIONS
AC-RK Accessory Rack Kit
•
For more information about AMX products and services visit www.amx.com
11-03
PCS
Power Current Sensor
(for US 110 VAC 3-pole receptacles)
FG426
The PCS Power Current Sensor can
sense high, low or no power level
states for one device. It requires
external DC power.
PCS2
Dual Power Current Sensor
(for US 110 VAC 3-pole receptacles)
FG427
The PCS2 Dual Power Current Sensor
can sense high, low or no power level
states for two devices, and includes a
built-in power supply.
The VSS2 includes two independent signal detection channels. Each channel
triggers a logic-level output when a signal is present. Dual video jacks for each
channel allow loop-through operation. Great for use as a power sensor for
VCRs and other video sources, or to provide a warning on loss of audio, video,
or RGB signal.
FEATURES
Detects presence of signal from 1 kHz to greater than 100 kHz
•
CONTROL PORTS
Two solid-state outputs for channels A and B
•
INCLUDES
Four RCA jacks
•
Two for each channel for loop-through operation
•
ENCLOSURE:
Molded black matte plastic
DIMENSIONS (HWD):
1.5" x 5.0" x 5.3" (38 mm x 127 mm x 133 mm)
WEIGHT:
10.9 oz (309 g)
RTS-1
Room Temperature Sensor (requires AXC-TEMP card)
FG748
The surface-mounted RTS-1 sends precise temperature measurement, from 0°-
250° F (-18°-120° C), to the AXC-TEMP Temperature Control Card.
CONTROL PORTS
Level output
•
Power input
•
ENCLOSURE:
Off-white metal for wall mounting
DIMENSIONS (HWD):
4.5" x 2.8" x 0.9" (114 mm x 70 mm x 23 mm)
WEIGHT:
3.2 oz (91 g)
The TVS TV Sensor is an intelligent, digital scan frequency sensor that can
send a power on/power off closure signal to an AMX Input/Output control port.
When used with Axcess and NetLinx Integrated Controller I/O ports, the TV
Sensor can be an integrated solution for automatic, sensed power control of
video/graphic displays.
CONTROL PORTS
One solid-state closure output (Sensed power on/off)
•
INCLUDES
Power on/off status LED
•
Internal frequency-sensor logic, (15-75 kHz)
•
Five-wire cable for closure output, 12 VDC input
•
ENCLOSURE:
Black plastic with matte finish
DIMENSIONS (HWD):
1.1" x 1.1" x 0.8" (27 mm x 27 mm x 20 mm)
WEIGHT:
1.1 oz (3 g)
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
VSS2
Video Sync Sensor
FG5916-10
TVS
TV Sensor
FG691