AMX PTM-D15 Product Catalog page 32

4 " C O L O R P A S S I V E T O U C H P A N E L S
SCREEN RESOLUTION
320x240 pixels (HV)
•
VIEWING ANGLE
Horizontal viewing angle: -+50°
•
Vertical viewing angle: -+50°
•
IR RECEPTION AREA
45° up on the AXT (30° on the AXD) from the horizontal plane
•
15° down on the AXT (30° on the AXD) from the horizontal plane
•
40° right of the vertical plane (both AXD and AXT units)
•
40° left of the vertical plane (both AXD and AXT units)
•
EXTERNAL BUTTONS
Six interchangeable external pushbuttons. Pushbutton assignments can include
•
the typical Device/Channel numbers, Flip to Page option and String/Macro.
Buttons are used as interface tools that operate on-screen menus or turn On/Off
the controlled equipment.
EXTERNAL LEDS
External LEDs: six LEDs located alongside each external pushbutton.
•
Independently operated and programmed.
BUTTONS
Set of 18 changeable button caps consisting of: six blanks, two embossed with
•
Up/Down arrows, and 10 engraved with standard icons. These buttons match the
bezel coloring.
BUTTONS LABELS
10 standard icon pre-printed buttons
•
These buttons contain 10 icons covering the following functions: MENU, LIGHTS,
•
AUDIO, VIDEO, ENVIRONMENT, SECURITY, INTERCOM, MUTE, DRAPES and POWER
LIGHT DETECTOR
Photosensitive light detector for adjustment of the panel brightness.
•
MOTION SENSOR
Proximity Infrared Detector to wake the panel when the panel is approached.
•
Activation range: + 20° vertically from center and + 45° horizontally from center.
•
IR RECEIVER
38 KHz, one-way IR reception (of AMX codes only)
•
MICROPHONE
Used for audio conferencing applications (intercom functionality)
•
SPEAKERS
Frequency response 450 Hz - 7 KHz
•
AXLINK/POWER
4-pin 3.5 mm mini-phoenix connector for communication to the AMX Central
•
Controller providing both data and power
AUDIO
8-pin 3.5 mm mini-phoenix connector for audio input/output
•
PROGRAMMING PORT
2.5 mm stereo female conductor jack (side mounted)
•
POWER CONSUMPTION
770 mA @ 12 VDC
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
AXD-CP4/A
4" Color Flush Mount Touch Panel
with Audio
FG5921-20 Black
FG5921-21 Almond
FG5921-22 White
OPERATING ENVIRONMENT
Indoor operation at temperatures between 10° C (50° F) to 40° C (104° F) and a
•
humidity range of 5% to 90% RH (non-condensing)
MEMORY
512KB of SRAM and 2MB of Flash for a total memory of 2.5MB
•
(2MB is available for buttons, icons, bitmaps, and fonts).
ENCLOSURE
BackBox with black matte finish Detachable front panel bezel are available in
•
White (FG5921-22), Black (FG5921-20) and Almond (FG5921-21)
DIMENSIONS
Housing: 4.60" x 5.34" x 1.87" (11.68 cm x 13.56 cm x 4.75 cm)
•
WEIGHT
2.23 lbs. (1.02 kg)
•
AC-CP4A/WRB
Water Resistant Bezel Set for AXD-CP4/A
FG5921-24
Introducing the water-resistant bezels for AXD-CP4/A - AC-CP4A/WRB. Set
includes all three colors- white, black, and almond - covered with a thin
transparent water-resistant film to protect the bezel including the touch screen,
sensor lens, and pushbuttons. It also includes a rubber-foam gasket to "seal" a
potential gap between the bezel and the wall.
CB-CP4/A is an optional Conduit/Wallbox for AXD-CP4/A Color Flush Mount
Touch Panels. It represents a metallic housing that is installed onto a beam in a
pre-wall setting. The Touch Panel is housed in a default back box that ships
with each unit that is not removed in the conduit box installation method.
The CB-CP4/A Conduit/Wallbox package includes drywall clips and screws for
installation to studs during the construction phase.
DIMENSIONS:
4.09" x 5.51" x 3.40" (10.39 cm x 13.99 cm x 8.64 cm)
•
CB-CP4/A
Conduit Box for AXD-CP4/A
FG033-10
For more information about AMX products and services visit www.amx.com
11-03