A X C E S S C A R D F R A M E S
AXF-MINI
Mini-CardFrame (up to 3 AXC control cards)
FG731
Holding up to three Axcess control cards, the Axcess Mini-CardFrame fits
between full CardFrames and Bus Controllers. For example, a system may need
a unique combination of control cards located close to a remote camera
pan/tilt/lens head. In another, the Mini-CardFrame could add three volume
cards to an AXCENT2 system. A distributed system may use the unit for IR,
relay and volume control in small meeting rooms. Each Mini-CardFrame adds
three control ports to the Central Controller, up to 255 devices. To use as a
small, stand-alone Central Controller, add an optional AXC-EM Enhanced
System Master Card to the Master slot.
CONTROL PORTS
Three front-access control card slots
•
Three rear-mounted control cable jacks (16-pin)
•
INCLUDES
Integrated AXC-S Server Card to manage CardFrame communication
•
One AXLink port
•
ENCLOSURE:
Wall- or rack-mount metal with black matte finish
DIMENSIONS (HWD):
1.75" x 17.0" x 13.64"
(44.5 mm x 431.8 mm x 346.5 mm)
WEIGHT: 5.5 lbs (2.5 kg)
OPTIONS
AXC-EM Enhanced System Master Card
•
CSB Cable Support Bracket
•
AXB-MPE+
Master Port Expander (with AXC-EM card)
FG713-10
The AXB-MPE+ Master Port Expander drives 12 independent AXLink wiring
runs of up to 3,000 feet each. The Master Port Expander also includes the
AXC-EM Enhanced Master Card for automatic backup processing.
CONTROL PORTS
12 independent AXLink bus connections
•
Data In and Out RJ-11 ports for daisy-chain operation
•
INCLUDES
AXC-EM Enhanced Master Card
•
Front-panel setup switches and status LEDs
•
ENCLOSURE:
Rack-Mount, metal with black matte finish
DIMENSIONS (HWD):
1.72" x 19" x 12.5"
(43.6 mm x 482.6 mm x 317.5 mm)
WEIGHT:
6 lbs (2.7 kg)
OPTIONS
Backup AXC-EM, placed inside AXB-MPE+
•
For more information about AMX products and services visit www.amx.com
11-03
AXB-SPE
Server Port Expander (requires AXB-MPE & AXB-MPE+)
FG714
The AXB-SPE Server Port Expander drives 12 independent AXLink wiring runs
of up to 3,000 feet each. The Server Port Expander operates from an SPE
connection with the AXB-MPE+ Master Port Expander or NXC-ME260 NetLinx
Master260 Card.
CONTROL PORTS
12 independent AXLink bus connections
•
Data In and Out RJ-11 ports for daisy-chain operation
•
INCLUDES
Front-panel setup switches and status LEDs
•
ENCLOSURE:
Rack-Mount, metal with black matte finish
DIMENSIONS (HWD):
1.72" x 19.0" x 12.5"
(43.6 mm x 482.6 mm x 317.5 mm)
WEIGHT:
6.0 lbs (2.7 kg)
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.