AMX PTM-D15 Product Catalog page 68

S Y S T E M T O O L S
EXA
Ethernet Crossover Adapter
FG959-10
Used to allow direct connection (without a network hub) between a PC's
10baseT Ethernet port to a Landmark or NetLinx Master Card.
ABS
AXLink Bus Strip
FG960
Why continue stuffing multiple AXLink wires into a few 4-pin terminals? The
AXLink Bus Strip provides 10 AXLink terminals and connectors for plug-and-
play wiring, as well as a power (PWR) status LED and 12 VDC power input.
APPLICATION
Plug in AXLink terminals to combine up to 10 AXLink wiring runs
•
INCLUDES
12 VDC power status LED
•
10 4-pin AXLink connectors
•
one 2-pin power connector
•
4" double-sided foam tape
•
DIMENSIONS (HWD):
1.14" x 12.0" x 1.27"
(28.95 mm x 304.8 mm x 32.25 mm)
WEIGHT:
5.8 oz (164.42 g)
POWER:
12 VDC, 7 amps max.
Need to connect a cable to a DB9 control port? Forget the hassles of parts,
pins, and soldering – get an STS, lock the wires down to the built-in screw
terminals, and plug it in.
INCLUDES
DB9 female connector
•
Screw terminal block (9-pin)
•
Snap-together molded shell
•
DIMENSIONS (HWD):
0.75" x 1.38" x 2.25" (19mm x 35 mm x 57 mm)
WEIGHT:
1.6 oz (45 g)
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
STS
Serial-To-Screw Terminal Adapter
(DB9 female to screw terminals)
FG959
IRIS is a stand-alone, self-contained unit used to capture IR or wired function
signals from a hand controller. Once captured and verified, the control
functions are sent to a PC operating the IRLIB program.
CONTROL PORTS
IR sensor to receive IR codes
•
IR serial input for wired IR codes
•
DB-9 female connector for Axcess and PC communication
•
INCLUDES
Large, two-digit status LED display
•
Adjustable RS-232 port (300-9,600 baud)
•
12 VAC power supply
•
IRLIB software for IBM-compatible computers
•
ENCLOSURE:
Metal with black matte finish
DIMENSIONS (HWD):
1.5" x 5.5" x 5.5" (38 mm x 140 mm x 140 mm)
WEIGHT:
18.2 oz (518.2 g)
OPTIONS
AC-RK Accessory Rack Kit
•
PM-TERM
PHASTLink 120 Ohm
PHASTLink/CAT-5 Terminator
FG2861-01 20 pack
Used for terminating open PHASTLink, ICSNet or ICSHub outputs
P O W E R S U P P L I E S
APPLICATION
DC power for NetLinx systems
•
DC POWER OUTPUT
3.5 mm power connector, 12 VDC at 2.8 A
•
Switching regulated, overload protected
•
AC POWER INPUT
110/220 VAC auto-switch operation; UL, CSA, and TUV listed
•
US power cord included (110 VAC installations only)
•
ENCLOSURE:
Molded black matte plastic, international IEC cable socket
DIMENSIONS (HWD):
4.6" x 2.3" x 1.5"
(117 mm x 58 mm x 35 mm), may vary
WEIGHT:
1 lb (450 g), may vary
IRIS
IR/Serial Data Capture Device
FG5448
PSN2.8
12 VDC, 2.8 A Power Supply
(regulated, 110 VAC input)
FG423-17
For more information about AMX products and services visit www.amx.com
11-03