C U S T O M P A N E L I N T E R F A C E S
The NXP-CPI16 NetLinx Custom Panel Interface is a versatile device, useful for
both custom panel and contact-closure applications. It will directly interface
with AMX Touch Panels and components designed for integration with Axcess
Control Systems. Two 20-pin headers provide ribbon cable wiring or direct-
connect insertion to circuit boards – one provides inputs for up to 16 closures
and the other drives feedback outputs for LEDs. Under software control, the
LED outputs can act as drivers to 8-segment bargraphs or operate as discrete
outputs for feedback.
In addition, the NXC-CPI16 also provides two quadrature inputs to control
variable levels such as volume or lights. Able to read digital signals from
mechanical or optical rotary encoders, the response can be adjusted under
software control.
FEATURES:
Integrates custom panels with 16 closure inputs and 16 LED outputs, pin-for-pin
•
compatible with panels designed for AXC-CPI16
Operates as low-cost closure
•
Acts as driver for up to two 8-segment LED bargraphs, each bargraph uses eight
•
of the 16 LED outputs
Allows precision digital control of up to two levels from quadrature inputs
•
Accepts mechanical or optical rotary encoders
•
Offers programmable level response, provides software-driven performance
•
adjustment, and switchable coarse/fine level control
INPUT CONNECTORS
Indicator power: Two-pin 3.5 mm captive wire
•
I/O Headers: Two 20-pin headers, 8 I/O channels each (16 closure inputs activated
•
with GND or TTL Low (< 0.8 V)). Open collector outputs (0-28 VDC). Inputs are
sampled approximately every 10 msec.
Rotary Encoder inputs: Two quadrature inputs on a 2x3 header (6-pin), two
•
encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and
a GND pin
ICSNET
Two RJ-45 connectors for ICSNet connection
•
ID BUTTON
Generates an event from the AXC-CPI16 to allow you to assign new device
•
numbers using the ID mode in NetLinx Studio Software
LED
ICSP status indicator (green)
•
OPEN COLLECTOR OUTPUTS
16-open collector outputs, acting as a switch to ground, up to 100 mA. Outputs
•
can be connected to voltages ranging between 0 and + 28 V. Each output is
updated every 10 msec
DIMENSIONS (HWD):
2.75" x 1.85" x 1.40" (6.99 cm x 4.70 cm x 3.56 cm)
•
WEIGHT:
8.10 oz. (229.63 g)
•
For more information about AMX products and services visit www.amx.com
11-03
NXP-CPI16
NetLinx Custom Panel Interface
FG410
APPLICATION:
PC board receives joystick or potentiometer control commands
•
CONTROL PORTS:
Eight analog inputs, 10-bit resolution, resistance (5K-100K)
•
or DC (0-5 V)
INCLUDES:
Reference potentiometers, 20-pin ribbon cable, 6.0' (1.8 m)
DIMENSIONS (HWD):
3.5" x 2.8" x 0.9" (89 mm x 69 mm x 23 mm)
WEIGHT:
4.2 oz (118 g), including ribbon cable
APPLICATION:
Large custom panel, up to 64 pushbuttons; incandescent switch lamps
•
CONTROL PORTS:
64 polled lamp LED/switch points; two commons for lamp,
•
LED, and switch Drivers for four bargraphs
INCLUDES:
Adjustable lamp glow level, 64-pin ribbon cable, 6.0' (1.8 m)
ENCLOSURE:
Molded black matte plastic for free-standing use
DIMENSIONS (HWD):
1.5" x 5.0" x 5.3" (38 mm x 127 mm x 133 mm)
WEIGHT:
18 oz (510 g), including ribbon cable
APPLICATION:
PC board for small custom panel, relay and input interface
•
CONTROL PORTS:
16 switch inputs, 16 outputs, switch to ground;
•
100 mA each for lamps, LEDs, or relays
INCLUDES:
Two 20-pin headers, two 20-pin ribbon cables, 6.0' (1.8 m)
DIMENSIONS (HWD):
1.8" x 2.8" x 0.9" (46 mm x 69 mm x 23 mm)
WEIGHT:
2.9 oz (82 g), including ribbon cable
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
AXP-AI8
Analog 8-Input Board
FG783
AXP-CPI
Custom Panel Interface
FG5775-01
AXP-CPI16
Custom Panel Interface Board
FG5780-10