AMX PTM-D15 Product Catalog page 57

N E T L I N X C U S T O M P A N E L I N T E R F A C E
The NXP-CPI16 NetLinx Custom Panel Interface is a versatile device, useful for
both custom panel and contact-closure applications. It will directly interface
with AMX Touch Panels and components designed for integration with Axcess
Control Systems. Two 20-pin headers provide ribbon cable wiring or direct-
connect insertion to circuit boards – one provides inputs for up to 16 closures
and the other drives feedback outputs for LEDs. Under software control, the
LED outputs can act as drivers to 8-segment bargraphs or operate as discrete
outputs for feedback.
In addition, the NXC-CPI16 also provides two quadrature inputs to control
variable levels such as volume or lights. Able to read digital signals from
mechanical or optical rotary encoders, the response can be adjusted under
software control.
FEATURES:
Integrates custom panels with 16 closure inputs and 16 LED outputs, pin-for-pin
•
compatible with panels designed for AXC-CPI16
Operates as low-cost closure
•
Acts as driver for up to two 8-segment LED bargraphs, each bargraph uses eight
•
of the 16 LED outputs
Allows precision digital control of up to two levels from quadrature inputs
•
Accepts mechanical or optical rotary encoders
•
Offers programmable level response, provides software-driven performance
•
adjustment, and switchable coarse/fine level control
INPUT CONNECTORS
Indicator power: Two-pin 3.5 mm captive wire
•
I/O Headers: Two 20-pin headers, 8 I/O channels each (16 closure inputs activated
•
with GND or TTL Low (< 0.8 V)). Open collector outputs (0-28 VDC). Inputs are
sampled approximately every 10 msec.
Rotary Encoder inputs: Two quadrature inputs on a 2x3 header (6-pin), two
•
encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and
a GND pin
ICSNET
Two RJ-45 connectors for ICSNet connection
•
ID BUTTON
Generates an event from the AXC-CPI16 to allow you to assign new device
•
numbers using the ID mode in NetLinx Studio Software
LED
ICSP status indicator (green)
•
OPEN COLLECTOR OUTPUTS
16-open collector outputs, acting as a switch to ground, up to 100 mA. Outputs
•
can be connected to voltages ranging between 0 and + 28 V. Each output is
updated every 10 msec
DIMENSIONS (HWD):
2.75" x 1.85" x 1.40" (6.99 cm x 4.70 cm x 3.56 cm)
•
WEIGHT:
8.10 oz. (229.63 g)
•
For more information about AMX products and services visit www.amx.com
11-03
NXP-CPI16
NetLinx Custom Panel Interface
FG410
N E T L I N X 2 - W A Y W I R E L E S S S Y S T E M P A C K A G E
The NI-CPNW 2-way NetLinx Wireless System Package is ideal for integrating
large and smaller projects such as boardrooms, conference rooms, home
theaters, training and government facilities, military installations, houses of
worship and more. Impressive control features at the touch of a button.
This control solution package includes:
VPN-CP, 2-way ViewPoint Color Wireless Touch Panel
•
VPA-BP, ViewPoint Rechargeable Battery (NiMH)
•
PSN2.8, 12VDC, 2.8A Power Supply
•
VPA-DS, ViewPoint Docking station
•
NI-2000 with power supply
•
AXR-NWS, NetWave Server
•
Programming cables
•
4 IR Emitters
•
N E T L I N X 1 - W A Y W I R E L E S S S Y S T E M P A C K A G E S
The world's most versatile 1-way wireless Touch Panel System: NetLinx 1-way
Wireless Touch Panel System. With four IR ports, three RS-232/422/485 ports,
four I/O channels, and four relays, the NetLinx NI-2000 Integrated Controller
delivers instantaneous, intelligent control.
VPX-CPNI
NetLinx 1-way Wireless Touch Panel System
FG841-K1-304
This control solution package includes:
VPT-CP 304 MHz ViewPoint Color Wireless Touch Panel
•
NI-2000 Integrated Controller
•
Four CC-IRC infrared emitter cables
•
One CC-COM programming cable
•
One ViewPoint programming adapter cable
•
AXR-RF RF 304 MHz Receiver
•
PSN 2.8 12VDC, 2.8A Power Supply
•
VPX-CPNI
NetLinx 1-way Wireless Touch Panel System
FG841-K1-310
This control solution package includes:
VPT-CP 310 MHz ViewPoint Color Wireless Touch Panel
•
NI-2000 Integrated Controller
•
Four CC-IRC infrared emitter cables
•
One CC-COM programming cable
•
One ViewPoint programming adapter cable
•
AXR-RF RF 310 MHz Receiver
•
PSN 2.8 12VDC, 2.8A Power Supply
•
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
*LIMITED AVAILABILITY*
NI-CPNW
NetLinx Wireless System Package
FG840-K16
*LIMITED AVAILABILITY*