AMX PTM-D15 Product Catalog page 93

A X C E S S P R O C E S S O R C A R D S
Fully compatible with Axcess software, the AXC-EM manages system operation
and executes control system programs. This Enhanced Master Card can
coordinate the activities of up to 255 different pieces of equipment, such as
other control cards, bus controllers and various input devices. These include
AMX Tiltscreens, touch panels, softwire panels, wireless receivers and custom
panel interfaces.
APPLICATION
Provides AXCESS Master processing and features to CardFrame
•
PROCESSOR
Motorola 16-bit M68340
•
MEMORY
Standard – 64KB; Optional – 256KB
•
INCLUDES
One status LED for power and AXLink operation
•
Master Program Port, male DB-9 connector
•
Setup switch for Master Port baud rate, parity, stop bits, and data bits
•
APPLICATION
Manages communication among control cards in CardFrame
•
PROCESSOR
Motorola MC68HC705
•
INCLUDES
One status LED for power and AXLink operation
•
One front-mounted AXLink jack for local testing of panels and Bus Controllers
•
Setup switch to set starting device number to CardFrame
•
A X C E S S D A T A C O N T R O L C A R D S
Many audiovisual and computer based devices can be controlled remotely by
using RS-232 or RS-422 commands. The AXC-232 RS-232/422/485 Interface
Card can generate a virtually unlimited number of product/function commands
as they are programmed into the AXC-M Master Card. As needs and
technology changes, existing cards can be reprogrammed or new cards added,
one for each device.
APPLICATION
RS-232/422/485 data control transmit and receive
•
CONTROL PORT
RS-232, RS-422/485 data port (300-38,400 baud)
•
INCLUDES
Two status LED indicators for transmit and receive
•
One setup switch for baud rate, parity, stop bits, and data bits
•
One micro-jumper for 100 ohm RS-422 termination
•
One micro-jumper for RS-422 or RS-485 operation
•
POWER:
125 mA @12 VDC
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
AXC-EM
Enhanced System Master Card
FG711
AXC-S
CardFrame Server Card
FG705
AXC-232
RS-232/422/485 Interface Card
FG725
Many audiovisual and computer-based devices can be remotely controlled
using RS-232 or RS-422 commands. The AXC-232++ RS-232/422 Interface
Card can generate virtually unlimited numbers of product/function commands
as they are programmed into the AXC-EM Master Card. As needs and
technology change, existing cards can be reprogrammed or new cards added,
one for each device.
APPLICATION
Advanced RS-232/422/485 data control and receive
•
CONTROL PORT
RS-232/422/485 port (300-115,200 baud), XON/XOFF, CTS/RTS
•
INCLUDES
Onboard 32-bit processor and 384KB non-volatile memory
•
1,000 Byte serial input buffer; 1,000 Byte AXLink buffer
•
Two status LED indicators for transmit and receive
•
One setup switch for baud rate, parity, stop bits, and data bits
•
One micro-jumper for 100 ohm RS-422 termination
•
One micro jumper for RS-422 or RS-485 operation
•
POWER:
160 mA @ 12 VDC
DIMENSIONS (HXD):
2.7" x 12.8" (69.3 mm x 325.6 mm)
WEIGHT:
4.8 oz (136.1 g)
The X-10 system is a unique way to control various devices in the home by
sending the commands throughout the house via the built-in AC wiring. X-10
system modules can turn electric lights on and off, start and stop motors and
pumps, open and close drapes, water the lawn, heat up the hot tub, and start
the coffee maker. The AXC-X10 X-10 Power Line Interface Card, when used
with the X-10 Power Line Interface Module, provides direct control of most X-
10 modules with all the programming features of the AMX Axcess system. The
AXC-X10 can handle up to 256 devices on each system, using all 16 house
and unit codes.
APPLICATION
Controls up to 256 devices that accept X-10 power line control commands
•
CONTROL PORT
X-10 control port
•
INCLUDES
Three status LEDs for online, transmit, and receive (future version)
•
X-10 Power Line Interface Module model #TW-523 with cab
•
AXC-232++
RS-232/422/485 Interface Card
(enhanced functionality)
FG725-10
AXC-X10
X-10 Power Line Interface Card
FG747-K
For more information about AMX products and services visit www.amx.com
11-03