R A D I A D I M M E R M O D U L E S
RDM-HDC
Heavy-Duty DC Module, 2,400 W, 0-12 VDC
FG606-63
APPLICATION
Dims DC-controlled electronic fluorescent ballasts
•
Ramps 0–12 VDC signal for level control
•
20A Positive air gap relay for power
•
Current sourcing or current sinking
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-FDB
FDB Module, 1,920 W
FG606-65
RDM-2FDB
Dual FDB Module, 1,920 W (x2)
FG606-66
RDM-3FDB
Triple FDB Module, 1,920 W (x3)
FG606-67
RDM-HFDB
Heavy-Duty FDB Module, 2,400 W
FG606-68
APPLICATION
3-Wire Fluorescent Dims 3-wire FDB-style electronic fluorescent ballasts
•
Provides variable phase control for dimming
•
Positive air gap relay for power
•
For use with Lutron FDB and ECO-10 ballasts
•
Also used for fluorescent dimming with dimming interfaces by others
•
R A D I A S W I T C H M O D U L E S
RDM-SWM
Switch Module, 20A
FG606-50
APPLICATION
20A positive air-gap relay
•
General-purpose switching applications
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications.
•
For more information about AMX products and services visit www.amx.com
11-03
APPLICATION
Two 20A positive air-gap relay
•
General-purpose switching applications
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-3SWM
Triple Switch Module, 20A
FG606-52
APPLICATION
Three 20A positive air-gap relay
•
General-purpose switching applications
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
RDM-3EM
Heavy Duty Energy Management Relay Module, 20A
FG606-81
Three 20A relays - Non-phase dependent
•
On-board module microprocessors - supports relay control and sequencing
•
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
Incandescent, transformer, low voltage, general purpose load types
•
RDM-6EM
Heavy Duty Energy Management Relay Module, 20A
FG606-80
Six 20A relays - Non-phase dependent
•
On-board module microprocessors - supports relay control
•
and sequencing
Installs in one enclosure space
•
UL/CUL listed for continuous-duty operation
•
Suitable for 120/240/277 VAC applications
•
Incandescent, transformer, low voltage, general purpose
•
load types
CONFIDENTIAL INFORMATION © 2003 AMX Corporation. All rights reserved. AMX and the AMX logo are all trademarks of AMX Corporation.
AMX reserves the right to alter specifications without notice at any time. AMX does not assume responsibility for any errors or omissions.
*LIMITED AVAILABILITY*
RDM-2SWM
Dual Switch Module, 20A
FG606-51
*LIMITED AVAILABILITY*